Skip to main content

ABB

ABB TAS02 Current Transformer for TAS Series

ABB TAS02 RFQ-Ready Current Transformer for TAS Series architecture. RFQ compatibility review support, warranty terms confirmed during quotation. RFQ Available — contact ZYPLC today.

SKUTAS02 BrandABB TypeCurrent Transformer SeriesTAS OriginSE CategoryIndustrial Automation Spare Parts
AvailabilityConfirm by RFQ, global sourcing supported
ConditionNew / Refurbished / Tested, subject to stock
Lead TimeFast quotation, shipment arranged after confirmation
ShippingDHL / FedEx / UPS worldwide
Need quotation, availability, or a compatible replacement?

Technical Details

Product specification and sourcing notes

Review the original product details, compatibility notes, and sourcing information in a clearer technical document layout.

ABB TAS02 Current Transformer for TAS Series

In modern industrial automation, the integrity of a control system depends not on any single component, but on the seamless coordination of every layer — from the control processor and I/O modules to the power supply, communication gateways, and field instrumentation. The ABB TAS02 is a precision current transformer engineered to fulfill a critical measurement role within ABB’s TAS Series low-voltage switchgear and protection architecture. Designed for accurate current sensing and signal conditioning, the TAS02 supports the upstream protection relays, metering units, and PLC-based control platforms that govern safe, continuous operation across demanding industrial environments.

Whether deployed in a new greenfield installation or integrated into an existing ABB control cabinet, the TAS02 delivers the measurement accuracy and electrical isolation required to maintain system-wide consistency. Its compact form factor and standardized secondary output make it directly compatible with ABB’s broader ecosystem of protection and automation components, reducing engineering overhead and simplifying commissioning across multi-panel switchgear assemblies.

Product Specification Table

Parameter Specification
Model ABB TAS02
Series TAS Series
Product Type Current Transformer (CT)
System Role Current Measurement & Signal Isolation for Protection and Metering
Secondary Output 1A / 5A (standard secondary current)
Accuracy Class Class 0.5 / Class 1 (protection and metering grade)
Rated Insulation Voltage Up to 660V AC
Frequency 50/60 Hz
Installation DIN Rail / Panel Mount, compatible with TAS Series enclosures
Operating Temperature -25°C to +70°C
Communication Compatibility Analog signal output; compatible with PROFIBUS, MODBUS RTU via upstream relay/gateway
Origin Germany
Warranty warranty terms confirmed during quotation (ZYPLC)

System Compatibility Notes

The ABB TAS02 does not operate in isolation — its value is realized through its position within a layered control architecture. In a typical TAS Series switchgear panel, the TAS02 feeds measured current signals to an ABB REF615 feeder protection relay, which uses that data to execute overcurrent, earth fault, and thermal overload protection logic. This relay communicates upstream to an ABB AC500 PLC (such as the PM564-T CPU module) via PROFIBUS DP or IEC 61850, where the control program manages load shedding, interlocking, and alarm sequencing across the entire facility.

On the I/O layer, the AC500 platform relies on modules such as the ABB AI523 analog input module to receive 4–20 mA process signals from field transmitters, while digital status signals from the TAS02-connected relay are routed through ABB DI524 digital input modules. The communication layer is managed by an ABB CI501-PNIO PROFINET communication interface module, ensuring deterministic data exchange between the PLC and SCADA or DCS systems.

Power integrity across the panel is maintained by an ABB CP-E 24/10.0 power supply unit, which provides stable 24V DC to the control backplane, relay coils, and communication modules. Terminal connections between field wiring and the control cabinet are handled by ABB ENTRELEC SNK 2.5 terminal blocks, which provide reliable, vibration-resistant connections in high-density wiring environments.

For human-machine interface requirements, the system integrates with an ABB CP635 touch panel HMI, allowing operators to monitor real-time current values, protection status, and alarm histories derived from the TAS02 measurement chain. In redundant architectures, a secondary ABB TAS05 or TAS10 current transformer may be installed in parallel to provide measurement redundancy for critical feeders, ensuring that protection functions remain active even during primary CT maintenance windows.

This coordinated design — spanning the TAS02 at the measurement layer, through the protection relay, PLC, communication gateway, HMI, and power supply — exemplifies the system architecture philosophy that underpins reliable industrial automation: every component is selected and configured to reinforce the performance of every other component in the chain.

Industrial Application Notes

The ABB TAS02 current transformer finds application across a wide range of industrial sectors where accurate current measurement and protection coordination are non-negotiable requirements.

In power distribution and electrical substation environments, the TAS02 is used to feed protection relays that guard medium-voltage feeders and transformer secondaries, providing the measurement accuracy needed to discriminate between load current and fault current with minimal operating time. In petrochemical and refinery plants, where motor control centers (MCCs) must protect large pump and compressor drives, the TAS02 supports thermal overload and phase-loss protection schemes that prevent costly unplanned shutdowns.

In water treatment and municipal utility facilities, the TAS02 is integrated into automated pump station control panels, where it monitors motor current draw and feeds data to SCADA systems for remote performance trending and predictive maintenance scheduling. In mining and metallurgical operations, where heavy equipment draws high and variable currents, the TAS02’s robust insulation rating and wide operating temperature range make it suitable for installation in harsh, dust-laden environments.

For packaging and discrete manufacturing production lines, the TAS02 supports condition monitoring applications, feeding current data to power meters and maintenance planning systems that track per-machine consumption and identify efficiency improvement opportunities. In building automation and commercial facility management, the TAS02 is used in main distribution boards to provide current monitoring for demand management and load balancing across multiple tenant circuits.

Product Compatibility FAQ

Q1: Is the ABB TAS02 compatible with third-party protection relays and PLCs outside the ABB ecosystem?
A: Yes. The TAS02 produces a standard 1A or 5A secondary current output, which is universally compatible with any protection relay, energy meter, or PLC analog input module that accepts standard CT secondary signals. While it is optimized for use within ABB TAS Series switchgear panels and pairs naturally with ABB REF615 or REM615 protection relays, it can be integrated into Siemens, Schneider Electric, or other vendor control architectures without modification, provided the burden rating of the connected device is within the CT’s rated burden capacity.

Q2: What are the installation and commissioning requirements for the TAS02 in an existing switchgear panel?
A: The TAS02 is designed for straightforward panel integration. It mounts directly onto the primary conductor (bus bar or cable) using its window-type or split-core design, depending on the variant. Secondary terminals connect to the protection relay or metering device using standard 2.5mm² copper conductors. During commissioning, engineers should verify the polarity of the secondary connections, confirm the burden does not exceed the rated VA, and perform a primary injection test to validate the ratio accuracy. No special tools or software are required for installation, and the unit is fully operational immediately after wiring verification.

Q3: What warranty terms are confirmed during quotation, and what support is available for long-term maintenance?
A: ZYPLC provides a warranty terms confirmed during quotation on the ABB TAS02 covering manufacturing defects, ratio accuracy out-of-specification conditions, and insulation failures under normal operating conditions. The warranty period begins from the date of shipment. For long-term maintenance, ZYPLC supports RFQ sourcing for TAS Series current transformers and compatible ABB protection and control components, enabling rapid replacement supply to minimize system downtime. Technical support for architecture compatibility, system integration, and spare parts planning is available directly through our sales team.