Bently Nevada 22810-00-10-10-02 Proximity Probe for 3300 Systems

Bently Nevada 22810-00-10-10-02 Industrial Network Interface for 3300 Series Systems

The Bently Nevada 22810-00-10-10-02 is an 8mm eddy-current proximity probe engineered for the 3300 Series machinery protection and condition monitoring platform. In modern smart factory environments, reliable vibration and position data from rotating machinery must flow seamlessly from field sensors through signal conditioning modules, into PLC controllers, SCADA systems, and asset management platforms. The 22810-00-10-10-02 serves as the critical sensing node in this data chain — converting mechanical displacement into precise electrical signals that drive real-time decisions across the entire automation architecture.

Designed for continuous operation in harsh industrial environments, this proximity probe delivers stable, low-noise output that integrates directly with the Bently Nevada 3300 XL 8mm Proximity Transducer System, including the companion extension cable and proximitor sensor. Its 8mm tip diameter and optimized sensing range make it the preferred choice for shaft radial vibration, axial position, differential expansion, and eccentricity measurements on turbines, compressors, pumps, and motors.

Compatibility & Integration Notes

Connected Automation Data Flow

In a fully connected industrial site, the 22810-00-10-10-02 proximity probe anchors the vibration data acquisition layer. The probe pairs with the Bently Nevada 3300 XL Proximitor Sensor (such as the 330180-91-00) to convert eddy-current displacement into a conditioned analog signal. This signal feeds into the Bently Nevada 3500/42M Proximitor/Seismic Monitor rack module, which performs real-time alarm processing and relay output for machinery protection.

From the 3500 Series rack, vibration data is transmitted via Modbus TCP/IP or OPC-UA to the plant’s DCS or SCADA platform — such as a GE iFIX or Wonderware InTouch HMI station — where operators monitor shaft centerline plots, trend data, and alarm states across multiple machines simultaneously. For facilities running Bently Nevada System 1 Evolution software, the 22810-00-10-10-02 data stream integrates natively, enabling predictive maintenance analytics, orbit plots, and automated work order generation.

In distributed plant topologies, the analog output from the Proximitor can be routed through a Phoenix Contact MINI MCR signal conditioner or a Pepperl+Fuchs KFD2-series isolator before entering a remote I/O module — such as a Siemens ET 200SP or Rockwell 1734 POINT I/O — connected to the main PLC via PROFINET or EtherNet/IP. This architecture ensures that vibration data from field-level sensors reaches the control layer with minimal latency, supporting both closed-loop protection logic and open-loop condition monitoring dashboards.

For edge computing deployments, the conditioned signal can be digitized by an industrial edge gateway (such as a Moxa UC-8100 or Advantech WISE-5000 series) running local analytics before forwarding aggregated health indices to cloud-based asset management platforms. This multi-layer data flow — from the 22810-00-10-10-02 probe tip through signal conditioning, I/O modules, PLC, SCADA, and edge gateway — forms the backbone of a transparent, data-driven machinery health management system.

Solving Data Isolation in Industrial Sites

Many industrial facilities still operate with fragmented monitoring architectures: vibration sensors wired to standalone meters, data logged manually, and no integration with the plant control system. The Bently Nevada 22810-00-10-10-02, when deployed within the 3300 or 3500 Series ecosystem, directly addresses these data isolation challenges.

Protocol unification is achieved by pairing the probe’s analog output with a Modbus RTU or OPC-UA-capable monitor module, allowing vibration data to join the same network backbone as process variables from PLCs and DCS controllers. Remote monitoring becomes possible when the 3500 rack’s Ethernet module streams real-time vibration vectors to SCADA dashboards accessible from the control room or via secure VPN from off-site engineering teams.

Production line transparency improves significantly when every critical rotating asset — compressor, pump, gearbox, motor — has a dedicated proximity probe feeding continuous position and vibration data into a unified historian. Maintenance teams can compare baseline orbits against current measurements, detect early-stage bearing wear or rotor imbalance, and schedule corrective action during planned shutdowns rather than reacting to unplanned failures.

System scalability is a core strength of the 3300/3500 platform. Additional 22810-series probes can be added to expand coverage to new machines without redesigning the network architecture. The modular rack design accommodates mixed measurement types — radial vibration, axial position, speed, and temperature — within a single chassis, simplifying cable management and reducing panel space requirements.

All units supplied by ZYPLC are sourced from verified supply channels, undergo pre-shipment functional testing, and are backed by a . Availability confirmed by RFQ inventory ensures fast dispatch to support urgent maintenance and commissioning schedules worldwide.

Industrial Connectivity FAQ

Q1: What communication protocols does the 22810-00-10-10-02 support for SCADA integration?
The probe itself outputs an analog voltage signal via the paired Proximitor sensor. Integration with SCADA or DCS is achieved through the Bently Nevada 3500 Series monitor rack, which supports Modbus TCP/IP, OPC-DA/UA, and 4–20mA analog outputs, enabling seamless connection to most industrial control platforms.

Q2: Is the 22810-00-10-10-02 compatible with non-Bently Nevada systems?
Yes. While optimized for the Bently Nevada 3300 XL Proximitor system, the probe’s coaxial output can be conditioned by compatible third-party signal conditioners that accept standard eddy-current probe inputs, allowing integration into Emerson, Honeywell, or Siemens-based monitoring architectures with appropriate interface modules.

Q3: What testing is performed before shipment?
Every 22810-00-10-10-02 unit supplied by ZYPLC undergoes pre-shipment functional verification, including output linearity check, insulation resistance test, and connector integrity inspection. A test report is available upon request. All units are covered by a from the date of dispatch.

Q4: How quickly can replacement units be dispatched for emergency maintenance?
ZYPLC maintains Availability confirmed by RFQ inventory of the 22810-00-10-10-02 and related 3300 Series components. Standard orders are processed within 1–2 business days, with express shipping options available for urgent plant maintenance requirements. Contact our team at plc.sales@zyplc.com or +86 19859288691 for availability confirmation.