Bently Nevada 330104-00-23-90-02-00 Proximity Probe for 3300 XL

Bently Nevada 330104-00-23-90-02-00 Proximity Probe for 3300 XL

In modern rotating machinery protection and condition monitoring systems, every component must function as part of a precisely coordinated architecture. The Bently Nevada 330104-00-23-90-02-00 is an 8mm eddy-current proximity probe engineered for seamless integration within the Bently Nevada 3300 XL Series vibration monitoring platform. Rather than operating as a standalone sensor, this probe is designed from the ground up to serve as the primary signal acquisition node in a layered automation system — feeding real-time shaft displacement and vibration data upward through the signal chain to protection monitors, data acquisition modules, and plant-level DCS or SCADA platforms.

The 330104-00-23-90-02-00 probe operates within the complete 3300 XL proximity transducer system, which includes the extension cable, proximitor sensor (driver), and the monitor rack. Its 25mm (1-inch) linear range, 200 mV/mil (7.87 V/mm) output sensitivity, and -24 VDC operating voltage make it fully compatible with the 3300 XL 8mm Proximitor Sensor (3300 XL 8mm), ensuring signal integrity from the measurement point to the monitor input card. This system integration capability — where the probe output is natively recognized and processed by the monitor without signal conditioning adapters — is a key advantage in high-availability machinery protection architectures.

Product Specification Table

System Compatibility Notes

The 330104-00-23-90-02-00 probe does not function in isolation — its value is realized only when properly integrated into the full Bently Nevada 3300 XL system architecture. At the sensing layer, this probe pairs directly with the Bently Nevada 3300 XL 8mm Proximitor Sensor (series 330180), which conditions the raw eddy-current signal into a calibrated -24 VDC analog voltage output. The Proximitor Sensor is typically mounted in the field junction box or machinery skid enclosure, bridging the probe at the machine casing and the monitor rack in the control room.

At the monitor layer, the conditioned signal feeds into a Bently Nevada 3300/16 Monitor or 3300/20 Monitor — dual-channel vibration monitors housed in the 3300 Rack system. These monitors perform real-time alarm and danger threshold evaluation, providing relay outputs to the machinery protection logic. The 3300 Rack itself (including the 3300/05 Power Supply and 3300/15 Key Phasor Module) forms the backbone of the protection system, supplying regulated -24 VDC to all Proximitor Sensors and synchronizing phase reference signals for vector analysis.

For plants requiring integration with a broader DCS or safety instrumented system (SIS), the 3300 XL architecture supports communication via the Bently Nevada 3500/92 Communication Gateway or System 1 Evolution software platform, enabling Modbus, Profibus, or OPC-UA data transfer to Honeywell, Emerson DeltaV, Siemens PCS 7, or ABB 800xA control systems. This system integration ensures that vibration data from the 330104-00-23-90-02-00 probe is not siloed within the machinery protection system but is available plant-wide for condition monitoring, predictive maintenance scheduling, and process optimization.

In redundant protection architectures, dual-probe configurations are common — a second proximity probe installed 90 degrees offset from the primary probe enables full X-Y shaft orbit analysis. The 3300/15 Key Phasor Module provides the once-per-revolution reference signal required for orbit plots, Bode plots, and polar plots in System 1 software, enabling engineers to distinguish between synchronous vibration (imbalance, misalignment) and sub-synchronous or super-synchronous phenomena (oil whirl, blade pass).

Industrial Application Notes

The 330104-00-23-90-02-00 proximity probe is deployed across a wide range of critical rotating machinery applications in industries where unplanned downtime carries severe operational and financial consequences.

In power generation — including gas turbines, steam turbines, and hydro generators — this probe monitors shaft radial vibration and rotor position continuously. Turbine protection systems built on the 3300 XL platform use this probe to detect bearing wear, rotor bow, and critical speed crossings during startup and shutdown sequences, triggering automatic trip signals before catastrophic failure occurs.

In oil and gas processing and petrochemical plants, the probe is installed on centrifugal compressors, booster pumps, and expanders operating in hazardous area classifications. Its robust armored cable construction and wide temperature tolerance make it suitable for offshore platforms, LNG terminals, and refinery environments where ambient conditions are extreme and maintenance access is limited.

In water treatment and municipal infrastructure, large vertical turbine pumps and blower trains rely on proximity probe systems to maintain continuous operation. The 3300 XL architecture ability to interface with SCADA systems via the 3500/92 gateway allows operators to monitor vibration trends remotely, scheduling maintenance during planned outages rather than responding to emergency failures.

In metallurgical and mining operations — including ball mills, SAG mills, and large fan drives — the probe durability under high-vibration, high-dust environments ensures reliable signal acquisition even in the most demanding industrial settings. Integration with plant historians and MES systems via System 1 Evolution enables long-term trend analysis and remaining useful life estimation for critical assets.

Product Compatibility FAQ

Q1: Is the 330104-00-23-90-02-00 directly compatible with existing 3300 XL monitor racks without additional signal conditioning?
Yes. The 330104-00-23-90-02-00 is a factory-calibrated component of the Bently Nevada 3300 XL proximity transducer system. When paired with the correct 3300 XL 8mm Proximitor Sensor and connected to a 3300/16 or 3300/20 monitor, no additional signal conditioning is required. The system achieves system integration out of the box, with the monitor automatically recognizing the probe sensitivity scale factor and applying the correct engineering unit conversion for gap, vibration amplitude, and alarm setpoints.

Q2: Can this probe be used in a redundant or voting architecture, and how does it interact with safety instrumented systems (SIS)?
Yes. In high-integrity protection applications, dual or triple proximity probe configurations are supported within the 3300 XL architecture. Each probe feeds an independent monitor channel, and the monitor relay outputs can be wired into a SIS voting logic solver (e.g., 2oo3 voting) to prevent spurious trips while maintaining protection integrity. For SIS integration, the 3500/92 Communication Gateway provides certified data output to IEC 61511-compliant safety systems. The warranty terms confirmed during quotation covers all units supplied, and our engineering team can provide system configuration documentation to support SIL verification activities.

Q3: What is the recommended maintenance and recalibration schedule for the 330104-00-23-90-02-00 in continuous service, and what does the warranty terms confirmed during quotation cover?
Bently Nevada recommends verifying proximity probe gap settings and output voltage calibration during each planned machinery outage, typically annually or per the plant reliability-centered maintenance (RCM) schedule. The probe tip should be inspected for mechanical damage, contamination, or target surface degradation. Our warranty terms confirmed during quotation covers manufacturing defects, calibration drift beyond specification, and connector integrity failures under normal operating conditions. Replacement units are available from stock with short lead times, minimizing spare parts inventory burden and ensuring rapid restoration of machinery protection coverage.

2026 ZYPLC. All rights reserved.

Contact: +86 19859288691 | plc.sales@zyplc.com