Bently Nevada 330105-02-12-10-12-CN Reverse Mount Probe for 3300 XL

Bently Nevada 330105-02-12-10-12-CN: Reverse Mount Proximity Probe for 3300 XL

The Bently Nevada 330105-02-12-10-12-CN is a reverse mount proximity probe engineered for seamless integration within the 3300 XL Series continuous machinery monitoring architecture. Designed to operate as a precision sensing element at the field instrumentation layer, this probe delivers consistent, high-fidelity vibration and position signals that form the foundation of reliable rotating machinery protection systems. Its role extends beyond simple signal acquisition — it is a critical node in a layered automation hierarchy that spans from the sensor level through signal conditioning, data acquisition, and ultimately to the control and safety shutdown layers.

In modern industrial control architectures, the integrity of the measurement chain begins at the probe tip. The 330105-02-12-10-12-CN interfaces directly with Bently Nevada 3300 XL proximitor/seismic transducer modules, which convert the raw eddy-current signal into a calibrated DC voltage proportional to shaft displacement. This signal is then routed to the 3500 Series rack-based monitoring system, where it is processed by dedicated monitor cards such as the 3500/42M Proximitor/Seismic Monitor or the 3500/40M Proximitor Monitor. The seamless compatibility between the probe, the proximitor, and the monitor card ensures that the signal chain remains unbroken and that alarm and trip setpoints are accurately enforced across the full dynamic range of the machine.

From a system architecture perspective, the 330105-02-12-10-12-CN supports both radial vibration and axial position measurement applications, depending on installation orientation and the associated proximitor configuration. When deployed alongside the 3300 XL 8mm Proximitor and paired with a 3500 rack equipped with a 3500/20 Rack Interface Module, the probe contributes to a fully integrated, API 670-compliant protection system. The reverse mount configuration is particularly valuable in installations where direct access to the probe tip is restricted by machine geometry, allowing engineers to route the extension cable through the bearing housing without compromising measurement accuracy or signal integrity.

At the network and communication layer, the 3500 rack system — which the 330105-02-12-10-12-CN feeds into — supports Modbus RTU, Modbus TCP/IP, and Bently Nevada’s proprietary TDXnet communication protocols. This enables real-time data transmission to distributed control systems (DCS), SCADA platforms, and plant historian servers, ensuring that vibration and position data captured by the probe is available for process optimization, predictive maintenance algorithms, and regulatory compliance reporting. The probe’s contribution to system-wide data quality is therefore not limited to the local protection function but extends to the broader digital infrastructure of the plant.

Power supply stability is another dimension of system architecture that directly affects probe performance. The 3300 XL proximitor modules require a regulated -24 VDC supply, typically sourced from the 3500 rack’s internal power supply module or from an external Bently Nevada power conditioner. In redundant architectures, dual power supply modules within the 3500 rack ensure that a single power supply failure does not interrupt the monitoring function. The 330105-02-12-10-12-CN, as the upstream sensing element, benefits directly from this power redundancy, as any interruption in proximitor supply voltage would result in a loss of the gap voltage signal and a potential false trip condition.

For engineering teams responsible for system commissioning and long-term maintenance, the 330105-02-12-10-12-CN offers significant advantages in terms of standardization and interchangeability. Its compatibility with the broader 3300 XL probe family — including the 330100, 330101, 330103, and 330180 series probes — means that spare parts management is simplified and that replacement procedures can be executed without recalibration of the monitoring system, provided that the replacement probe is of the same sensitivity and range specification. This interchangeability is a key factor in reducing mean time to repair (MTTR) and in maintaining system availability targets in critical applications.

Product Specification Table

System Compatibility Notes

The 330105-02-12-10-12-CN achieves its full potential when deployed as part of a coordinated, multi-layer control system architecture. At the signal conditioning layer, the probe pairs with the Bently Nevada 3300 XL 8mm Proximitor, which provides the regulated excitation signal and converts the eddy-current response into a usable DC voltage. This proximitor output is then wired to a Bently Nevada 3500/42M Proximitor/Seismic Monitor card installed within a 3500 Monitoring Rack, where alarm and danger setpoints are configured and enforced in real time.

The 3500 rack’s 3500/20 Rack Interface Module manages communication between the monitor cards and the plant’s DCS or SCADA system, transmitting vibration, position, and status data over Modbus TCP/IP or TDXnet. For plants requiring enhanced data resolution and event capture, the Bently Nevada System 1 Software platform aggregates data from multiple 3500 racks, enabling fleet-wide machinery health monitoring and integration with predictive maintenance workflows.

In redundant protection architectures, the 330105-02-12-10-12-CN is often installed in pairs — one probe per measurement plane — with each probe connected to a separate monitor channel. This dual-channel configuration, supported by the 3500/40M Proximitor Monitor, ensures that a single probe failure does not result in a loss of protection. The 3500/15 Power Supply Module provides the regulated -24 VDC required by the proximitor, with dual redundant power supplies available for critical applications.

At the human-machine interface layer, operators interact with the monitoring system through the Bently Nevada 3500/93 Display Interface Module or through integrated DCS graphics that display real-time vibration trends, gap voltages, and alarm states derived from the probe signal. For field technicians performing commissioning or troubleshooting, the Bently Nevada TK-3 Calibration Tool provides a portable means of verifying probe sensitivity and gap voltage without disconnecting the probe from the monitoring system.

The complete system architecture — from the 330105-02-12-10-12-CN probe through the proximitor, monitor card, rack interface, and communication network — represents a fully integrated, API 670-compliant machinery protection solution that supports system integration across the plant’s automation hierarchy.

Industrial Application Notes

The 330105-02-12-10-12-CN is deployed across a wide range of heavy industrial applications where continuous, high-reliability rotating machinery monitoring is essential. In power generation facilities, the probe monitors shaft vibration and axial position on steam turbines, gas turbines, and large synchronous generators, providing the early warning signals that prevent catastrophic failures and unplanned outages. The reverse mount configuration is particularly well-suited to turbine bearing housings where space constraints preclude the use of standard front-mount probes.

In petrochemical and refinery environments, the 330105-02-12-10-12-CN is used to monitor centrifugal compressors, pumps, and expanders operating in hazardous area classifications. Its compatibility with the 3500 rack’s SIL-rated monitor cards enables its use in Safety Instrumented Systems (SIS) where the probe signal contributes to a safety function that initiates an emergency shutdown upon detection of excessive vibration or rotor displacement.

In water treatment and municipal utility plants, the probe monitors large vertical turbine pumps and blower units, where bearing wear and rotor imbalance are common failure modes. The long-term stability of the 330105-02-12-10-12-CN’s sensitivity and linearity characteristics reduces the frequency of field calibration checks and supports the plant’s condition-based maintenance program.

In mining and mineral processing operations, the probe is installed on ball mills, SAG mills, and large slurry pumps, where the harsh operating environment — characterized by high ambient vibration, dust, and temperature extremes — demands a robust sensing solution. The probe’s stainless steel construction and high-temperature rating ensure reliable operation in these demanding conditions.

Across all application sectors, the 330105-02-12-10-12-CN supports a warranty terms confirmed during quotation and is available from ZYPLC with guaranteed stock and rapid dispatch, minimizing the risk of extended downtime due to spare parts unavailability.

Product Compatibility FAQ

Q1: Is the 330105-02-12-10-12-CN compatible with existing 3500 Series monitoring racks, and does it require recalibration upon installation?
The 330105-02-12-10-12-CN is fully compatible with all 3500 Series monitoring racks when paired with the appropriate 3300 XL 8mm Proximitor. Provided that the replacement probe matches the original probe’s sensitivity specification (7.87 V/mm), no recalibration of the monitor card setpoints is required. Engineers should verify the gap voltage at the proximitor output after installation to confirm that the probe is operating within the linear range before returning the machine to service.

Q2: Can this probe be used in a redundant dual-probe configuration, and how does the 3500 rack handle a single probe failure?
Yes, the 330105-02-12-10-12-CN is fully compatible with redundant dual-probe configurations supported by the 3500/40M and 3500/42M monitor cards. In a dual-channel configuration, each probe is connected to a separate monitor channel. If one probe fails or its signal falls outside the configured OK limits, the monitor card generates a Not OK (NOK) alert and can be configured to either maintain the protection function using the remaining probe or initiate a controlled shutdown, depending on the voting logic configured in the rack interface module.

Q3: What is the warranty coverage for the 330105-02-12-10-12-CN, and what support is available for long-term maintenance planning?
All 330105-02-12-10-12-CN units supplied by ZYPLC are covered by a warranty terms confirmed during quotation against manufacturing defects and performance deviations from the published specification. ZYPLC maintains dedicated inventory of 3300 XL series probes and associated proximitor modules to support rapid replacement in the event of field failures. For long-term maintenance planning, ZYPLC’s technical team can assist with spare parts strategy, compatibility verification, and system architecture review to ensure that your machinery protection system remains fully operational throughout its service life. Contact us at +86 19859288691 or plc.sales@zyplc.com.

© 2026 ZYPLC. All rights reserved.

Contact: +86 19859288691 | plc.sales@zyplc.com