Skip to main content

Bently Nevada

Bently Nevada 330130-085-02-05 Network Interface 3300 Series

Bently Nevada 330130-085-02-05 Proximitor Extension Cable for 3300 Series vibration monitoring. Industrial gateway, SCADA integration, warranty terms confirmed during quotation, tested before shipment where applicable.

SKU330130-085-02-05 BrandBently Nevada TypeProximitor Extension Cable Series3300 Series OriginUS CategoryIndustrial Automation Spare Parts
AvailabilityConfirm by RFQ, global sourcing supported
ConditionNew / Refurbished / Tested, subject to stock
Lead TimeFast quotation, shipment arranged after confirmation
ShippingDHL / FedEx / UPS worldwide
Need quotation, availability, or a compatible replacement?

Technical Details

Product specification and sourcing notes

Review the original product details, compatibility notes, and sourcing information in a clearer technical document layout.

The Bently Nevada 330130-085-02-05 is a precision-engineered Proximitor Extension Cable designed for the 3300 Series vibration monitoring platform. In modern smart factory environments, reliable signal transmission between rotating machinery and the control network is not optional — it is the foundation of predictive maintenance, real-time diagnostics, and uninterrupted production. This extension cable serves as a critical physical link in the industrial data chain, connecting eddy-current proximity probes to Proximitor sensors and ultimately feeding clean, low-noise vibration signals into the broader automation and monitoring architecture.

With a cable length of 8.5 metres (28 feet) and a rated impedance matched to the 3300 Series signal conditioning requirements, the 330130-085-02-05 ensures that the analog vibration signal — representing shaft displacement, gap voltage, and dynamic motion — travels from the field device to the monitoring module without degradation. This signal integrity is essential when the downstream system is a Bently Nevada 3500/42M Proximitor I/O module or a 3500/22M transient data interface, both of which depend on accurate millivolt-level inputs to calculate bearing clearance, rotor orbit, and alarm thresholds.

Compatibility & Integration Notes

Parameter Specification
Product SKU 330130-085-02-05
Brand Bently Nevada
Series 3300 Series Vibration Monitoring
Product Type Proximitor Extension Cable
Cable Length 8.5 m (28 ft)
Signal Protocol Analog eddy-current / proximity signal (DC voltage)
Interface Type Coaxial connector, field-to-Proximitor sensor link
Transmission Capability Low-noise analog signal, matched impedance for 3300 Series
Network Compatibility Bently Nevada 3300 Series, 3500 Series monitoring racks
System Application Rotating machinery protection, SCADA integration, DCS connectivity
Origin United States
Warranty warranty terms confirmed during quotation — all units shipped tested and verified

Connected Automation Data Flow

Understanding the role of the 330130-085-02-05 requires tracing the full data path from the machine to the control room. At the field level, an eddy-current proximity probe — such as those in the Bently Nevada 330104-00-06-10-02-00 probe series — is mounted adjacent to the rotating shaft. The probe generates a continuous DC voltage signal proportional to the gap between the probe tip and the shaft surface. This raw signal travels through the 330130-085-02-05 extension cable to the 3300 XL or standard 3300 Series Proximitor sensor, where it is conditioned and buffered for transmission.

From the Proximitor output, the conditioned signal enters the Bently Nevada 3500/15 power supply and I/O rack, which aggregates multiple channel inputs across the monitoring system. The 3500/42M Proximitor I/O module processes the incoming signals and converts them into digital data packets that can be read by the plant’s DCS or SCADA platform via the 3500/92 communication gateway module. This gateway supports Modbus TCP, Ethernet/IP, and OPC-DA/UA protocols, enabling seamless integration with Honeywell Experion, Emerson DeltaV, Siemens PCS 7, or any OPC-compatible HMI and historian system.

For installations requiring extended cable runs or harsh electromagnetic environments, the 330130-080-00-00 armored extension cable variant provides additional shielding, while the TK-3e portable data collector can be connected at the Proximitor output for offline route-based data acquisition. In multi-machine monitoring architectures, the 3300/16 dual-channel monitor card works in conjunction with the extension cable to provide redundant vibration and position monitoring on critical turbines, compressors, and pumps. The entire signal chain — from probe tip through extension cable, Proximitor sensor, I/O module, communication gateway, and up to the SCADA historian — represents a fully traceable industrial data link that supports real-time alarm management, trend analysis, and remote diagnostics.

Solving Data Isolation in Industrial Sites

One of the most persistent challenges in industrial facilities is data isolation: vibration data locked inside proprietary monitoring hardware that cannot be accessed by the plant’s broader automation network. The Bently Nevada 330130-085-02-05, as part of the 3300 Series ecosystem, directly addresses this problem by ensuring that the physical signal layer is reliable and protocol-ready for upstream integration.

When the extension cable delivers a clean, noise-free signal to the Proximitor sensor, the downstream 3500 Series rack can accurately digitize and transmit that data to the plant network. Without a properly matched extension cable, signal attenuation, impedance mismatch, or ground loop interference can corrupt the vibration waveform — causing false alarms, missed fault detection, or communication errors at the gateway level. By using the OEM-specified 330130-085-02-05, engineers eliminate this source of data quality degradation.

For facilities transitioning to Industry 4.0 architectures, the 3300 Series platform — anchored by components like this extension cable — provides a bridge between legacy analog instrumentation and modern digital networks. The Proximitor signal can be digitized at the 3500 rack, transmitted via Modbus TCP or OPC-UA through the 3500/92 gateway, and ingested by edge computing platforms or cloud-based condition monitoring services. This enables production line transparency, remote diagnostics from the control room or mobile devices, and predictive maintenance scheduling based on real vibration trend data — all without replacing the existing probe and sensor infrastructure.

System expansion is equally straightforward: additional extension cables and probes can be added to the 3300 Series rack without reconfiguring the network topology, making the 330130-085-02-05 a scalable component in growing monitoring architectures.

Industrial Connectivity FAQ

Q1: Is the 330130-085-02-05 compatible with both 3300 Series and 3500 Series Bently Nevada systems?
The 330130-085-02-05 is designed and specified for the 3300 Series Proximitor sensor platform. It is compatible with 3500 Series monitoring racks when used with the appropriate 3300 Series Proximitor sensor as the signal conditioning interface. Always verify cable length and impedance specifications against your specific rack and probe configuration before installation.

Q2: How does this extension cable affect communication latency in a SCADA-integrated monitoring system?
As an analog signal cable, the 330130-085-02-05 introduces no digital communication latency. Signal propagation delay across 8.5 metres of coaxial cable is negligible (nanosecond range) and has no measurable impact on the sampling rate or alarm response time of the 3500 Series monitoring rack or its SCADA gateway output.

Q3: What quality assurance process is applied before shipment?
All units are tested prior to shipment to verify electrical continuity, connector integrity, and impedance matching. Each cable is supplied with a warranty terms confirmed during quotation covering manufacturing defects and signal performance. Test records are available upon request for critical installation projects.

Q4: Can this cable be used in high-EMI environments such as near variable frequency drives or large motors?
The 330130-085-02-05 uses a coaxial construction with shielding appropriate for standard industrial environments. For installations in close proximity to variable frequency drives (VFDs), large transformers, or high-current bus bars, additional conduit routing or the armored cable variant (330130-080-00-00) is recommended to maintain signal integrity and prevent electromagnetic interference from corrupting the proximity signal.