Skip to main content

Emerson

Emerson TREXLHPNAWS1S Industrial Device Communicator for TREX Systems

Emerson TREXLHPNAWS1S WirelessHART Device Communicator Plus for TREX Series. HART/WirelessHART protocol gateway, SCADA integration, warranty terms confirmed during quotation.

SKUTREXLHPNAWS1S BrandEmerson TypeIndustrial Device Communicator SeriesTREX OriginUS CategoryIndustrial Automation Spare Parts
AvailabilityConfirm by RFQ, global sourcing supported
ConditionNew / Refurbished / Tested, subject to stock
Lead TimeFast quotation, shipment arranged after confirmation
ShippingDHL / FedEx / UPS worldwide
Need quotation, availability, or a compatible replacement?

Technical Details

Product specification and sourcing notes

Review the original product details, compatibility notes, and sourcing information in a clearer technical document layout.

The Emerson TREXLHPNAWS1S WirelessHART Device Communicator Plus is a high-performance industrial network interface engineered for seamless integration of field instrumentation into modern smart factory architectures. Built on the proven TREX Series platform, this communicator supports both wired HART and WirelessHART (IEC 62591) protocols, enabling real-time bidirectional data exchange between field-level sensors, transmitters, control valves, and upper-level systems including DCS, PLC controllers, SCADA platforms, and HMI workstations. Whether deployed in oil and gas, chemical processing, power generation, water treatment, or discrete manufacturing, the TREXLHPNAWS1S delivers the connectivity backbone that modern industrial sites demand.

In a typical smart factory data flow, the TREXLHPNAWS1S acts as the critical communication bridge at the field device layer. Signal acquisition begins at the sensor or transmitter level — pressure transmitters, temperature sensors, flow meters, and level instruments all communicate their process variables via the HART protocol. The TREXLHPNAWS1S reads, interprets, and relays this data upward through the WirelessHART mesh network, where it is received by a WirelessHART gateway such as the Emerson 1420 Wireless Gateway or the Emerson 781 Smart Wireless Gateway. From the gateway, structured process data flows into the plant’s DCS or SCADA backbone — platforms such as Emerson DeltaV DCS or Honeywell Experion PKS — enabling operators to monitor, trend, and alarm on live field data without interrupting the primary 4–20 mA control loop.

The TREXLHPNAWS1S is equally capable of interfacing with Emerson AMS Device Manager for asset health monitoring and predictive maintenance workflows. When connected to AMS, maintenance engineers can remotely access device diagnostics, calibration records, and configuration parameters for instruments such as the Emerson Rosemount 3051 pressure transmitter, the Rosemount 644 temperature transmitter, or the Fisher FIELDVUE DVC6200 digital valve controller — all without physical access to the field device. This remote diagnostic capability dramatically reduces unplanned downtime and supports condition-based maintenance strategies across large, geographically distributed plant sites.

For sites operating mixed-protocol environments, the TREXLHPNAWS1S supports protocol bridging between legacy 4–20 mA HART devices and modern WirelessHART mesh networks. This makes it an ideal tool for phased digital transformation projects, where existing wired instrumentation must coexist with new wireless field devices. The communicator’s intuitive interface also supports configuration and commissioning of Emerson TREX-compatible instruments, including the Emerson Rosemount 248 wireless temperature transmitter and the Rosemount 3308 wireless guided wave radar level transmitter, reducing commissioning time and eliminating manual configuration errors.

From a network architecture perspective, the TREXLHPNAWS1S integrates naturally into IEC 62591 WirelessHART mesh topologies, where each field device acts as a network node capable of routing data packets for neighboring devices. This self-organizing, self-healing mesh architecture ensures robust, redundant data transmission even in environments with physical obstructions, RF interference, or dynamic plant layouts. Network diagnostics, signal strength mapping, and join/leave events are all visible through the communicator interface, giving network engineers full visibility into the wireless field network health.

At the SCADA and HMI integration layer, data collected via the TREXLHPNAWS1S and its associated WirelessHART gateway is made available to supervisory systems through standard OPC-DA or OPC-UA data servers. This enables seamless integration with SCADA platforms such as Wonderware System Platform, Ignition SCADA, or Emerson’s own Ovation DCS, as well as HMI terminals deployed at local control panels or remote operator stations. Real-time process values, device status flags, and diagnostic alerts are all surfaced to operators in a unified dashboard, supporting rapid alarm response and informed decision-making.

Every TREXLHPNAWS1S unit shipped by ZYPLC undergoes pre-shipment functional testing to verify communication integrity, protocol handshake performance, and hardware condition. Units are supplied with a warranty terms confirmed during quotation covering manufacturing defects and communication failures, with global logistics support for expedited delivery to industrial sites worldwide. Inventory is maintained RFQ Available for shipment arranged after confirmation, minimizing lead times for urgent maintenance replacements or new project deployments.

Compatibility & Integration Notes

Parameter Specification
Primary Protocol WirelessHART (IEC 62591)
Secondary Protocol Wired HART (Bell 202)
Interface Type Wireless Mesh Network Node + HART Loop Interface
Transmission Frequency 2.4 GHz IEEE 802.15.4
Network Compatibility IEC 62591 WirelessHART Mesh, HART 5/6/7
System Application DCS, SCADA, HMI, AMS, PLC Integration
Communication Mode Bidirectional, Real-Time Process Data + Diagnostics
Power Supply Battery-Powered (field portable)
Display Integrated color touchscreen
Warranty warranty terms confirmed during quotation (manufacturing defects & communication failures)

Connected Automation Data Flow

The TREXLHPNAWS1S sits at the intersection of field instrumentation and plant-wide data infrastructure. In a representative smart factory deployment, the data flow begins at the field device layer: a Rosemount 3051S pressure transmitter or a Rosemount 644 temperature transmitter outputs a HART signal carrying both the primary process variable and rich device diagnostic data. The TREXLHPNAWS1S reads this HART signal directly from the 4–20 mA loop, interprets the device descriptor, and — when operating in WirelessHART mode — transmits the data packet into the plant’s WirelessHART mesh network.

Within the mesh, data hops through neighboring WirelessHART nodes — which may include Rosemount 3308 guided wave radar transmitters, Rosemount 248 wireless temperature transmitters, or Fisher FIELDVUE DVC6200 digital valve controllers — before arriving at the Emerson 1420 Wireless Gateway or 781 Smart Wireless Gateway. The gateway aggregates data from all mesh nodes and delivers it via Modbus TCP or OPC-UA to the plant’s DCS or SCADA server. At the supervisory layer, Emerson DeltaV DCS or an Ignition SCADA platform receives the structured data stream, where it is displayed on HMI screens, logged to historian databases, and evaluated against alarm setpoints. Maintenance teams access device-level diagnostics through Emerson AMS Device Manager, enabling predictive maintenance scheduling without process interruption.

Solving Data Isolation in Industrial Sites

One of the most persistent challenges in industrial automation is data isolation — the condition where field devices, control systems, and enterprise platforms operate in disconnected silos, preventing operators from gaining a unified view of plant performance. The TREXLHPNAWS1S directly addresses this challenge by providing a universal communication bridge between legacy HART instruments and modern WirelessHART network infrastructure.

Sites with mixed instrumentation generations — where older 4–20 mA HART transmitters coexist with newer smart field devices — can use the TREXLHPNAWS1S to bring all devices onto a single wireless data backbone without replacing existing wiring or instrumentation. This eliminates the need for costly parallel wiring runs and allows phased digital transformation at a pace that matches operational and capital planning cycles.

For remote monitoring applications, the WirelessHART mesh network enabled by the TREXLHPNAWS1S extends SCADA visibility to field devices in locations where running new signal cables is impractical — tank farms, remote pump stations, pipeline monitoring points, and outdoor process areas. Operators gain real-time process data and device health status from these remote points, enabling proactive intervention before equipment failures escalate into unplanned shutdowns.

Production line transparency is further enhanced by the TREXLHPNAWS1S’s ability to surface HART device diagnostics — including sensor degradation alerts, valve travel deviation warnings, and transmitter self-test results — directly to the SCADA and AMS layers. This transforms reactive maintenance into a data-driven, condition-based strategy, reducing mean time to repair (MTTR) and extending the operational life of critical field assets. System expansion is straightforward: additional WirelessHART devices join the mesh network automatically, with no rewiring or network reconfiguration required.

Industrial Connectivity FAQ

Q1: What communication protocols does the TREXLHPNAWS1S support, and is it compatible with existing HART instruments?
The TREXLHPNAWS1S supports both wired HART (HART 5, 6, and 7) and WirelessHART (IEC 62591) protocols. It is fully compatible with any HART-enabled field device, including transmitters, analyzers, and digital valve controllers from Emerson and other major manufacturers. No firmware upgrades or hardware modifications are required on existing HART instruments.

Q2: How does the TREXLHPNAWS1S ensure network stability and data reliability in electrically noisy industrial environments?
The WirelessHART protocol used by the TREXLHPNAWS1S employs frequency hopping spread spectrum (FHSS) across the 2.4 GHz band, combined with a self-healing mesh network topology. If a communication path is disrupted by RF interference or physical obstruction, the mesh automatically reroutes data through alternative nodes, maintaining continuous data delivery with latency typically under one second per update cycle.

Q3: Can the TREXLHPNAWS1S integrate with our existing SCADA and DCS platforms without additional middleware?
Yes. Data collected by the TREXLHPNAWS1S is delivered to the plant network via a WirelessHART gateway (such as the Emerson 1420 or 781 gateway), which provides standard OPC-DA, OPC-UA, and Modbus TCP interfaces. These are natively supported by all major SCADA platforms including Wonderware, Ignition, Emerson DeltaV, and Honeywell Experion, eliminating the need for custom middleware or protocol converters.

Q4: What does the warranty terms confirmed during quotation cover, and what is the typical lead time for delivery?
Every TREXLHPNAWS1S supplied by ZYPLC is covered by a warranty terms confirmed during quotation against manufacturing defects and communication failures, effective from the date of shipment. Pre-shipment functional testing is performed on all units to verify hardware integrity and protocol performance. Stock units are available for shipment arranged after confirmation, with global logistics support for expedited delivery to minimize project and maintenance lead times.