The GE IC695CPE400-ABAB is a high-performance CPU module engineered for the GE RX3i PACSystems platform, delivering robust industrial network connectivity across Ethernet/IP and Modbus TCP protocols. Operating at 1.1 GHz with dual integrated Ethernet ports, this module serves as the central intelligence and communication gateway within smart factory architectures — bridging field-level devices, PLC controllers, remote I/O, HMI panels, SCADA systems, variable frequency drives, and edge computing nodes into a unified, real-time data network.
In modern industrial environments, the demand for seamless data flow between operational technology (OT) and information technology (IT) layers has never been greater. The IC695CPE400-ABAB addresses this challenge by acting as the primary protocol handler and network coordinator within the RX3i backplane, enabling deterministic communication from signal acquisition at the sensor level all the way to enterprise-level SCADA dashboards and MES platforms.
Compatibility & Integration Notes
| Parameter |
Specification |
| SKU / Part Number |
IC695CPE400-ABAB |
| Brand / Series |
GE Automation / RX3i PACSystems |
| Communication Protocols |
Ethernet/IP, Modbus TCP, SRTP, OPC-UA (via gateway) |
| Network Interfaces |
Dual RJ-45 Ethernet (10/100 Mbps) |
| Processor Speed |
1.1 GHz |
| Transmission Capability |
Real-time cyclic and acyclic data exchange |
| Network Compatibility |
Industrial Ethernet, TCP/IP, EtherNet/IP CIP |
| System Applications |
SCADA, HMI, DCS, MES, Remote I/O, Edge Gateway |
| Product Category |
Industrial Network Interface / PLC CPU Module |
| Origin |
United States |
| Warranty |
warranty terms confirmed during quotation |
| Stock Status |
RFQ Available — shipment arranged after confirmation |
Connected Automation Data Flow
Within a fully integrated smart factory, the IC695CPE400-ABAB functions as the central node in a multi-layer communication architecture. At the field level, distributed sensors and actuators — including pressure transmitters, flow meters, and proximity switches — feed analog and digital signals into GE IC694MDL660 discrete input modules and IC694ALG220 analog input modules mounted in the RX3i backplane. The IC695CPE400-ABAB processes these inputs at 1.1 GHz, executing ladder logic and structured text programs with sub-millisecond scan times.
For remote I/O expansion across the plant floor, the CPU communicates with GE IC695RMX128 remote I/O scanner modules over high-speed Ethernet/IP, extending the control network to distributed I/O racks without additional wiring infrastructure. This architecture supports flexible plant layouts and simplifies future capacity expansion.
At the drive and motion layer, the IC695CPE400-ABAB exchanges real-time speed references and feedback data with GE AF-600FP variable frequency drives via Modbus TCP, enabling coordinated motor control across conveyor systems, pump stations, and compressor banks. The dual Ethernet ports allow simultaneous connection to both the plant control network and a dedicated drive communication subnet, eliminating network bottlenecks.
HMI integration is achieved through direct Ethernet/IP connections to GE QuickPanel+ IC755CxSxxADA operator panels, providing operators with live process visualization, alarm management, and parameter adjustment capabilities at the machine level. The CPU’s SRTP (Service Request Transport Protocol) support further enables seamless data exchange with GE Proficy HMI/SCADA iFIX and Proficy CIMPLICITY supervisory platforms, delivering plant-wide visibility from a centralized control room.
For edge computing and IIoT connectivity, the IC695CPE400-ABAB can interface with GE MDS SD Series industrial wireless gateways, transmitting process data over secure wireless links to cloud-based analytics platforms. This capability supports predictive maintenance programs by streaming vibration, temperature, and energy consumption data to AI-driven diagnostic engines without disrupting the primary control network.
The module’s OPC-UA gateway compatibility — when paired with a GE Proficy Historian data server — enables standardized data publishing to MES and ERP systems, closing the loop between production execution and business intelligence layers. This end-to-end connectivity transforms isolated machine data into actionable manufacturing insights.
Solving Data Isolation in Industrial Sites
One of the most persistent challenges in legacy industrial environments is protocol fragmentation — where PLCs, drives, sensors, and SCADA systems speak different communication languages, creating data silos that prevent real-time visibility and coordinated control. The IC695CPE400-ABAB directly addresses this problem through its native multi-protocol support, simultaneously handling Ethernet/IP CIP messaging, Modbus TCP polling, and SRTP peer-to-peer communication within a single CPU module.
For plants operating mixed-vendor environments, the module’s open Ethernet architecture allows integration with third-party devices from Siemens, Rockwell Automation, Schneider Electric, and Mitsubishi Electric through standard industrial protocols, eliminating the need for proprietary communication adapters. This interoperability is critical for brownfield modernization projects where replacing existing field devices is cost-prohibitive.
Remote monitoring and diagnostics are enabled through the CPU’s built-in web server and SNMP support, allowing maintenance engineers to access real-time diagnostic data, fault logs, and network statistics from any browser-equipped device on the plant network — or remotely via VPN. This capability dramatically reduces mean time to repair (MTTR) by enabling remote fault isolation before dispatching field technicians.
Production line transparency is achieved through the module’s high-speed data logging capabilities, which capture process variables at configurable scan rates and timestamp them for trend analysis. When integrated with GE Proficy Plant Applications, this data feeds directly into OEE (Overall Equipment Effectiveness) calculations, downtime analysis, and quality management workflows — providing plant managers with the real-time production intelligence needed to drive continuous improvement initiatives.
System scalability is built into the RX3i architecture: additional IC695PBM300 PROFIBUS master modules or IC695ETM001 Ethernet interface modules can be added to the backplane as communication requirements grow, protecting the initial investment while accommodating future network expansion without CPU replacement.
Industrial Connectivity FAQ
Q1: What communication protocols does the IC695CPE400-ABAB support, and is it compatible with third-party SCADA systems?
The IC695CPE400-ABAB natively supports Ethernet/IP (CIP), Modbus TCP, and SRTP protocols. It is fully compatible with major SCADA platforms including GE Proficy iFIX, CIMPLICITY, Wonderware InTouch, Ignition by Inductive Automation, and Kepware OPC server — enabling seamless integration into both GE-native and mixed-vendor automation environments.
Q2: How does the dual Ethernet port design improve network stability and reduce communication latency?
The dual integrated Ethernet ports allow the IC695CPE400-ABAB to maintain separate network segments for control traffic and supervisory/HMI traffic simultaneously. This network segmentation prevents high-volume SCADA polling from interfering with time-critical PLC-to-drive or PLC-to-I/O communications, ensuring deterministic response times typically below 10ms for control-critical data exchanges.
Q3: Can the IC695CPE400-ABAB be expanded to support additional communication protocols or remote I/O nodes as the system grows?
Yes. The RX3i backplane architecture supports hot-insertion of additional communication modules including PROFIBUS master (IC695PBM300), DeviceNet scanner, and additional Ethernet interface modules (IC695ETM001). This modular expansion capability allows the control system to grow alongside production requirements without replacing the CPU or disrupting existing network configurations.
Q4: What quality assurance and warranty coverage is provided with the IC695CPE400-ABAB?
Every IC695CPE400-ABAB unit supplied by ZYPLC undergoes pre-shipment functional testing including power-on verification, communication port validation, and firmware version confirmation. All units are covered by a warranty terms confirmed during quotation against manufacturing defects and operational failures. Expedited replacement and technical support are available throughout the warranty period to minimize production downtime.