Omron S8VK-C48024 Power Supply for S8VK-C

Omron S8VK-C48024 Power Supply for S8VK-C

The Omron S8VK-C48024 is a 480W, 24VDC switch mode power supply engineered for seamless integration within layered industrial control system architectures. Designed as a core power layer component in Omron’s S8VK-C Series, this unit delivers stable, regulated DC power to PLCs, I/O modules, communication gateways, HMI panels, and field devices across demanding automation environments. Its DIN-rail mounting profile, wide input voltage range (100–240VAC), and high conversion efficiency make it a preferred choice for system architects who require consistent power delivery across control cabinets, MCC panels, and distributed automation nodes.

Unlike standalone power supplies, the S8VK-C48024 is conceived as a system-level component. Its output characteristics are optimized to match the power consumption profiles of Omron CP1H, CJ2M, and NX1P2 series PLCs, as well as CJ-series I/O expansion racks and NX-series EtherCAT I/O units. When deployed alongside Omron’s CJ1W-PD025 or CJ1W-PD022 power supply modules in redundant rack configurations, the S8VK-C48024 provides the upstream 24VDC bus that sustains uninterrupted controller operation during primary power fluctuations.

Product Specification Table

System Compatibility Notes

In a fully integrated Omron control architecture, the S8VK-C48024 occupies the power layer and directly supports the operational continuity of every upstream and downstream component. At the controller level, Omron CP2E and NX1P2 series PLCs draw their 24VDC logic power from the S8VK-C bus, ensuring that CPU scan cycles, program execution, and memory retention remain uninterrupted even during AC line transients. For larger rack-based systems, the S8VK-C48024 feeds the CJ1W-PD025 internal power supply module, which in turn distributes regulated power across CJ-series I/O backplanes.

At the I/O layer, Omron CJ1W-ID211 digital input modules and CJ1W-OD211 digital output modules rely on stable 24VDC field power for sensor excitation and actuator switching. The S8VK-C48024’s low output ripple (≤ 120mVp-p) is particularly important for analog I/O modules such as the CJ1W-AD041-V1, where power quality directly affects signal resolution and measurement accuracy. In EtherCAT-based distributed I/O architectures, NX-series EtherCAT coupler units (NX-ECC203) and their associated NX-ID/NX-OD I/O slices are powered from the same 24VDC rail, making the S8VK-C48024 a foundational element of the entire field bus power domain.

At the network and communication layer, Omron CJ1W-EIP21 EtherNet/IP communication units and CJ1W-SCU41-V1 serial communication units require clean, stable 24VDC to maintain protocol stack integrity and prevent communication timeouts. The S8VK-C48024’s fast transient response (≤ 1ms recovery to within 1% of nominal) ensures that communication modules remain online during sudden load changes caused by output module switching. For HMI integration, Omron NA5-series and NB-series HMI panels connected to the same control cabinet draw their 24VDC supply from the same S8VK-C bus, and the S8VK-C48024’s 20A output capacity provides sufficient headroom for simultaneous HMI, PLC, and I/O operation without voltage droop.

In redundant power architectures, two S8VK-C48024 units can be paralleled using Omron’s S8VK-R redundancy modules, creating a fault-tolerant 24VDC bus that maintains system operation even if one power supply fails. This configuration is commonly specified in critical process control applications where downtime carries significant operational or safety consequences. The S8VK-C48024’s built-in active current sharing ensures balanced load distribution between redundant units, extending the service life of both supplies and simplifying preventive maintenance scheduling.

Industrial Application Notes

Manufacturing & Discrete Automation: In automotive body shop welding lines and electronics assembly SMT lines, the S8VK-C48024 powers Omron PLC racks controlling servo drives, vision systems, and conveyor indexing units. Its high efficiency reduces heat dissipation inside sealed control enclosures, lowering cooling requirements and extending component life in 24/7 production environments.

Power & Energy: In substation automation and distribution management systems, the S8VK-C48024 provides the 24VDC control power for protection relay panels, RTU communication modules, and SCADA I/O interfaces. Its wide input voltage range accommodates the variable AC supply quality common in utility environments, and its isolation rating meets the dielectric requirements of IEC 61850-compliant protection systems.

Petrochemical & Process Control: In refinery DCS architectures and offshore platform control systems, the S8VK-C48024 is installed in Ex-rated control rooms to power field junction boxes, HART multiplexers, and safety instrumented system (SIS) I/O modules. Its operating temperature range and vibration resistance comply with the environmental requirements of IEC 60068 for process industry installations.

Water & Wastewater Treatment: In SCADA-controlled pump stations and membrane filtration plants, the S8VK-C48024 powers remote I/O panels and telemetry units that monitor flow, pressure, and chemical dosing. Its DIN-rail form factor fits standard IEC 60439 control panels used in water utility infrastructure.

Mining & Metallurgy: In conveyor drive control systems and ore processing automation, the S8VK-C48024 supplies 24VDC to Omron PLC racks managing variable frequency drives (VFDs), belt weighers, and level sensors. Its short-circuit protection and OTP functions prevent cascade failures in high-dust, high-vibration mining environments.

Packaging & Material Handling: In high-speed filling lines and palletizing systems, the S8VK-C48024 powers motion control racks where Omron G5-series servo drives and R88D-KN servo amplifiers require stable 24VDC logic power independent of the main servo bus. Its fast load transient response prevents logic power dips during simultaneous multi-axis motion starts.

Product Compatibility FAQ

Q1: Is the S8VK-C48024 compatible with Omron CJ2M and NX1P2 PLC systems for direct 24VDC bus integration?
Yes. The S8VK-C48024 is fully compatible with Omron CJ2M, NX1P2, CP1H, and CP2E series PLCs as the primary 24VDC power source. Its output voltage is adjustable within ±10% of 24VDC, allowing fine-tuning to match the specific input voltage tolerance of each PLC model. For CJ-series rack systems, the S8VK-C48024 feeds the CJ1W-PD025 internal power supply, which distributes regulated power across the backplane. No additional interface modules are required for system integration with standard Omron control architectures.

Q2: Can two S8VK-C48024 units be used in a redundant power configuration, and what additional components are needed?
Yes. Two S8VK-C48024 units can be configured in a redundant 24VDC bus using Omron’s S8VK-R series redundancy modules, which provide automatic load sharing and failover without interrupting the output bus. The redundancy module monitors both supplies and isolates a failed unit while the healthy unit assumes full load. This configuration is recommended for critical process control, safety instrumented systems, and any application where unplanned power loss would trigger a safety event or production shutdown. ZYPLC supplies both the S8VK-C48024 and compatible S8VK-R modules with a Warranty and support terms confirmed before quote.

Q3: What is the recommended maintenance interval for the S8VK-C48024, and how does the Warranty and support terms confirmed before quote support long-term system reliability?
Omron recommends inspecting DIN-rail power supplies every 12 months as part of a scheduled preventive maintenance program, including checking output voltage under load, inspecting terminal connections for corrosion or loosening, and verifying that ventilation clearances are maintained. The S8VK-C48024 supplied by ZYPLC includes a Warranty and support terms confirmed before quote covering manufacturing defects and premature component failure. In the event of a warranty claim, ZYPLC provides advance replacement to minimize system downtime. For long-term maintenance planning, ZYPLC recommends maintaining one spare S8VK-C48024 per control cabinet to support rapid swap-out during scheduled shutdowns or unplanned failures.