Yaskawa SRDA-CUA662AADX200-HW0273067-5 Industrial Network Power Cable for DX200 Systems

Yaskawa SRDA-CUA662AADX200-HW0273067-5 Industrial Network Power Cable for DX200 Systems

The Yaskawa SRDA-CUA662AADX200-HW0273067-5 is a precision-engineered power cable designed for seamless integration within the Yaskawa DX200 robot controller ecosystem. As industrial automation environments grow increasingly complex — spanning field-level devices, PLC controllers, remote I/O modules, HMI panels, SCADA platforms, servo drives, and edge gateways — the integrity of every power and signal connection becomes mission-critical. This cable serves as a foundational link in the DX200 controller’s internal power distribution architecture, ensuring stable, uninterrupted energy delivery to servo amplifier units and motion control circuits that drive high-precision robotic operations.

In a modern smart factory, data flows continuously from sensors and actuators at the field level, through motion controllers and communication gateways, up to SCADA supervisory systems and MES platforms. The DX200 controller — at the heart of this chain — relies on robust internal cabling like the SRDA-CUA662AADX200 HW0273067-5 to maintain signal fidelity and power stability across all connected axes. Any degradation in this cable directly impacts the controller’s ability to execute real-time motion commands, process encoder feedback, and maintain synchronization across multi-axis robotic cells.

Network Communication Table

Connected Automation Data Flow

The SRDA-CUA662AADX200-HW0273067-5 operates within a tightly integrated automation data chain. At the field level, sensors and vision systems feed real-time positional and environmental data into the Yaskawa DX200 controller, which processes motion commands and distributes power to servo amplifier units — such as the SRDA-A5A21A and SRDA-COA12A01A-E — through precisely rated internal cables. These amplifiers drive the robot’s joint motors, with encoder feedback looping back through the controller’s communication bus to ensure closed-loop accuracy.

At the network layer, the DX200 controller communicates upstream via EtherNet/IP or PROFIBUS-DP to PLC platforms such as the Yaskawa MP3300 machine controller or third-party Siemens S7-series PLCs, enabling coordinated multi-cell production sequencing. Remote I/O modules connected via DeviceNet or Memobus extend the controller’s reach to peripheral devices — conveyor drives, pneumatic actuators, and safety relay modules — without adding latency to the motion control loop.

HMI panels, such as the Yaskawa MotionWorks IEC HMI or third-party Weintek and Proface terminals, connect to the DX200’s Ethernet port to provide operators with real-time axis status, alarm history, and production counters. SCADA gateways — including Yaskawa’s own YRC1000 communication interface modules and industrial edge gateways running OPC-UA — aggregate data from multiple robot cells and push it to MES or cloud analytics platforms for predictive maintenance and OEE monitoring.

Variable frequency drives (VFDs) on conveyor and peripheral systems, such as the Yaskawa GA700 or A1000 series drives, are integrated into the same network fabric, with their status data visible alongside robot telemetry in the SCADA dashboard. The power cable SRDA-CUA662AADX200 HW0273067-5 is the silent enabler of this entire data and power flow — without it, the servo amplifier chain breaks, and the entire robotic cell goes offline.

Solving Data Isolation in Industrial Sites

One of the most persistent challenges in industrial automation is data isolation — where robots, PLCs, drives, and sensors operate on incompatible protocols, creating information silos that prevent real-time visibility and coordinated control. The Yaskawa DX200 platform addresses this through its multi-protocol communication architecture, supporting EtherNet/IP, PROFIBUS, DeviceNet, and Memobus/Modbus simultaneously, allowing it to act as a protocol gateway between field devices and supervisory systems.

The SRDA-CUA662AADX200-HW0273067-5 power cable ensures that the DX200’s internal power distribution remains stable under all operating conditions — a prerequisite for the controller to maintain its role as a communication hub. When this cable degrades or fails, the result is not just a power interruption but a complete loss of network participation for that robot cell, creating exactly the kind of data island that smart factory initiatives aim to eliminate.

By maintaining verified stock of critical spare cables like the HW0273067-5, facilities can dramatically reduce unplanned downtime. Remote diagnostics via the DX200’s built-in Ethernet interface allow maintenance teams to monitor cable-related fault codes — such as servo amplifier undervoltage alarms — before they escalate to full production stops. Integration with SCADA alarm management systems means that a degrading power connection triggers an automated work order in the CMMS, enabling proactive replacement during scheduled maintenance windows rather than emergency shutdowns.

For multi-line facilities running mixed robot generations — combining DX100 and DX200 controllers — the SRDA-CUA662AADX200 cable’s compatibility across both platforms simplifies spare parts inventory management, reducing the number of unique SKUs that maintenance teams must stock while ensuring cross-platform system continuity.

Industrial Connectivity FAQ

Q1: Is the SRDA-CUA662AADX200-HW0273067-5 compatible with both DX100 and DX200 controllers?
Yes. The SRDA-CUA662AADX200 cable series is designed for use across the Yaskawa DX100 and DX200 robot controller platforms, making it a versatile spare for facilities running mixed controller generations. Always verify the specific connector type and cable length against your controller’s service manual before installation.

Q2: How does a faulty power cable affect network communication in the DX200 system?
A degraded or failed SRDA-CUA662AADX200-HW0273067-5 cable can cause servo amplifier undervoltage faults, which immediately halt motion execution and suspend the controller’s participation in the EtherNet/IP or PROFIBUS network. This results in loss of real-time data from that robot cell in your SCADA or HMI system until the cable is replaced and the controller is restarted.

Q3: What is the lead time and warranty for this cable?
We maintain verified in-stock inventory of the SRDA-CUA662AADX200-HW0273067-5 for immediate dispatch. All units are covered by a 12-month warranty against manufacturing defects. Each cable undergoes pre-shipment functional testing to ensure it meets Yaskawa’s original specification before leaving our facility.

Q4: Can this cable be used in high-cycle robotic applications such as welding or material handling?
Yes. The SRDA-CUA662AADX200 series is rated for the demanding duty cycles of Yaskawa’s industrial robot lineup, including arc welding, spot welding, and high-speed material handling applications. For environments with extreme vibration or thermal cycling, we recommend periodic inspection of all internal controller cables as part of your preventive maintenance program.

© 2026 ZYPLC. All rights reserved.
Original Source: https://zyplc.com
Contact: +86 19859288691 | [email protected]