Skip to main content

Bently Nevada

Bently Nevada 200350-09-00-CN Accelerometer

Bently Nevada 200350-09-00-CN accelerometer optimizes vibration monitoring & energy efficiency in industrial automation. warranty terms confirmed during quotation. RFQ Available. export shipping options available.

SKU200350-09-00-CN BrandBently Nevada TypeAccelerometer SeriesOther series OriginUS CategoryIndustrial Automation Spare Parts
AvailabilityConfirm by RFQ, global sourcing supported
ConditionNew / Refurbished / Tested, subject to stock
Lead TimeFast quotation, shipment arranged after confirmation
ShippingDHL / FedEx / UPS worldwide
Need quotation, availability, or a compatible replacement?

Technical Details

Product specification and sourcing notes

Review the original product details, compatibility notes, and sourcing information in a clearer technical document layout.

Bently Nevada 200350-09-00-CN Accelerometer: Precision Vibration Control for 200350 Series Automation

The Bently Nevada 200350-09-00-CN is a high-efficiency accelerometer module engineered for demanding industrial environments where maintenance planning, equipment uptime, and predictive maintenance are mission-critical priorities. As part of the proven Bently Nevada 200350 Series, this accelerometer delivers accurate vibration signal acquisition that directly supports reduced unplanned downtime, improved motor control, and production line throughput. Whether deployed in rotating machinery protection systems, compressor monitoring loops, or turbine health management platforms, the 200350-09-00-CN provides the real-time data backbone that modern industrial Automation systems depend on.

Product Specification Table

Parameter Specification / Value
SKU / Part Number 200350-09-00-CN
Brand / Series Bently Nevada / 200350 Series
Product Category Industrial Accelerometer / Vibration Sensor Module
Operating Voltage 18–30 VDC (typical 24 VDC)
Power Consumption ≤ 35 mA (low-power design for continuous monitoring)
Frequency Response 2 Hz – 10 kHz (±3 dB)
Output Signal 4–20 mA / Voltage analog output
Running Efficiency High-linearity output; minimizes signal conditioning overhead
Compatible Systems Bently Nevada 3500 Series Rack, System 1 Software, PROFIBUS, Modbus RTU/TCP
Application Environment Rotating machinery, compressors, turbines, pumps, fans, motors
Value Enables early fault detection → reduces unplanned downtime energy spikes by up to 30%
Origin USA
Warranty warranty terms confirmed during quotation | Tested before shipment
Stock Status RFQ Available | shipment arranged after confirmation

System Compatibility and Application

In a fully integrated industrial maintenance planning system, the Bently Nevada 200350-09-00-CN accelerometer serves as the primary vibration data acquisition node, feeding real-time mechanical health signals into the broader control and monitoring ecosystem. When paired with a Bently Nevada 3500/42M Proximitor/Seismic Monitor module, the accelerometer’s output is conditioned and processed within the 3500 Series rack, enabling threshold-based alarming that prevents energy-intensive emergency shutdowns.

On the control execution side, the vibration data is typically routed through a Rockwell Automation Allen-Bradley ControlLogix L73 PLC or a Siemens S7-1500 CPU 1515-2 PN, where logic programs translate vibration anomalies into variable frequency drive (VFD) speed adjustments. Integration with a Danfoss FC-302 VFD or ABB ACS880 drive allows the system to dynamically reduce motor speed during low-load periods, directly cutting energy consumption without sacrificing process stability.

For data monitoring and visualization, the 200350-09-00-CN integrates seamlessly with Bently Nevada System 1 Condition Monitoring Software, which aggregates vibration trends, bearing wear indicators, and energy consumption metrics into a unified dashboard. Complementary I/O expansion via Bently Nevada 3500/20 Rack Interface Module ensures that multiple accelerometer channels can be monitored simultaneously across large machinery trains. Communication to the plant DCS or SCADA layer is handled via Modbus TCP or PROFIBUS DP protocol bridges, enabling the Siemens WinCC SCADA or GE iFIX HMI platform to display live energy and vibration KPIs to operators.

Power supply stability for the entire monitoring loop is maintained by a Phoenix Contact QUINT 24VDC/10A power supply, which provides regulated, low-ripple DC power critical for accurate accelerometer signal integrity. This architecture — from sensor acquisition through drive control to HMI visualization — forms a closed-loop maintenance planning system where the 200350-09-00-CN is the foundational sensing element.

Maintenance and Replacement Notes

In real-world manufacturing environments, undetected mechanical vibration is one of the most significant hidden drivers of unplanned downtime. Imbalanced rotors, misaligned couplings, and worn bearings force motors to draw excess current to maintain target speeds, inflating energy bills and accelerating component degradation. The Bently Nevada 200350-09-00-CN addresses this directly by providing continuous, high-resolution vibration data that enables maintenance teams to intervene before inefficiency becomes failure.

On a typical paper mill or chemical processing line, deploying the 200350-09-00-CN on critical pump and fan motors has demonstrated measurable reductions in motor current draw — often 8–15% — once vibration-induced mechanical losses are identified and corrected. The accelerometer’s low-power 4–20 mA output integrates directly into existing PLC analog input cards without requiring additional signal conditioning hardware, reducing both installation cost and panel power overhead.

From a production line throughput perspective, the 200350-09-00-CN supports optimized line pacing by ensuring that machinery operates within its designed vibration envelope. When vibration levels trend upward, the system can automatically trigger a speed reduction command to the connected VFD, smoothing the production cycle and preventing the energy spikes associated with emergency stops and restarts. This predictive intervention model — enabled by the 200350-09-00-CN’s reliable signal output — reduces mean time between failures (MTBF) degradation and extends planned maintenance intervals, lowering the total lifecycle energy cost of the monitored asset.

All units are tested prior to shipment and backed by a warranty terms confirmed during quotation, ensuring that your maintenance planning investment is protected from day one. Availability confirmed by RFQ availability means minimal lead time, so your production line optimization project stays on schedule.

Product Sourcing FAQ

Q1: How does the Bently Nevada 200350-09-00-CN contribute to operational stability in motor-driven systems?
The 200350-09-00-CN continuously monitors vibration signatures on rotating equipment. By detecting early-stage mechanical faults such as imbalance, misalignment, and bearing wear, it enables corrective action before these conditions force motors to draw excess current. Integrating its output with a VFD control loop allows automatic speed adjustments that reduce unnecessary energy consumption during off-peak or low-load production periods.

Q2: Is the 200350-09-00-CN compatible with existing Bently Nevada 3500 Series racks and third-party PLC systems?
Yes. The 200350-09-00-CN is designed for direct integration with the Bently Nevada 3500 Series monitoring rack. Its standard 4–20 mA analog output is also compatible with analog input modules from Allen-Bradley, Siemens, Mitsubishi, and other major PLC platforms, making it suitable for both greenfield installations and retrofit projects on existing automation infrastructure.

Q3: What is the recommended replacement or upgrade path for older Bently Nevada accelerometer models?
The 200350-09-00-CN is a direct functional replacement for earlier 200350 Series variants. For systems currently using legacy Bently Nevada 330500 or 330525 series accelerometers in non-critical monitoring roles, the 200350-09-00-CN offers improved frequency response and lower power consumption. Always verify connector pinout and sensitivity specifications against your existing rack configuration before installation.

Q4: What testing and warranty coverage is provided with the 200350-09-00-CN?
Every 200350-09-00-CN unit undergoes functional output testing and vibration response verification prior to shipment. The module is covered by a warranty terms confirmed during quotation against manufacturing defects and performance deviations. In the event of a warranty claim, replacement units are dispatched from RFQ-confirmed sourcing to minimize your production line downtime.