GE Multilin
GE Multilin UR8GH Communication Gateway for UR Series
GE Multilin UR8GH UR Series gateway: IEC 61850, Modbus & DNP3 for SCADA integration. warranty terms confirmed during quotation, RFQ compatibility review, global shipping.
GE Multilin
GE Multilin UR8GH UR Series gateway: IEC 61850, Modbus & DNP3 for SCADA integration. warranty terms confirmed during quotation, RFQ compatibility review, global shipping.
Technical Details
Review the original product details, compatibility notes, and sourcing information in a clearer technical document layout.
The GE Multilin UR8GH is a high-performance communication gateway module engineered for the Universal Relay (UR) Series platform, purpose-built to bridge the gap between field-level protection devices and upper-layer SCADA, DCS, and maintenance planning systems. In modern power distribution, smart substations, and industrial automation environments, seamless data flow between protection relays, control systems, and monitoring platforms is not optional — it is the backbone of operational reliability. The UR8GH delivers exactly that: a robust, protocol-rich communication interface that ensures every layer of the control architecture remains synchronized, visible, and responsive.
At its core, the UR8GH supports IEC 61850, the international standard for substation automation and protection communication, alongside Modbus TCP/RTU and DNP3 — three of the most widely deployed industrial protocols in power utility and process control environments. This multi-protocol capability allows the UR8GH to serve as a true system integration node, connecting legacy field devices with modern digital substations without requiring costly infrastructure overhauls. Whether the upstream system is a GE iFIX SCADA platform, a Wonderware InTouch HMI, or a third-party maintenance planning system, the UR8GH translates and transmits data with deterministic latency and high reliability.
Within the UR Series rack architecture, the UR8GH occupies a critical position in the communication layer. It works in direct coordination with the UR CPU modules — such as the UR6XX and UR7XX processor cards — which handle protection logic and event recording, while the UR8GH manages all external communication traffic. This division of responsibility ensures that protection functions are never compromised by network load, a fundamental requirement in IEC 61850-compliant substation designs. The module slots into the standard UR chassis backplane, sharing the internal high-speed bus with I/O modules such as the UR6DV digital input/output card and analog measurement modules, enabling real-time signal correlation across the entire relay platform.
From a network architecture perspective, the UR8GH supports dual Ethernet ports, enabling ring or star topology configurations that align with IEC 61850-3 substation network standards. This dual-port design supports seamless integration with industrial managed Ethernet switches — such as those from the Hirschmann MICE or Cisco IE series — forming a redundant network backbone that eliminates single points of failure. In high-availability substation designs, the UR8GH can be paired with a redundant UR CPU module and a UR power supply module to form a fully fault-tolerant protection and communication node, capable of surviving individual component failures without interrupting SCADA data streams or protection signaling.
The UR8GH’s role in the data flow chain begins at the signal acquisition layer. Analog and digital inputs from current transformers, voltage transformers, and binary contact inputs are processed by the UR relay’s internal measurement engine. The UR8GH then packages this data — including phasor measurements, event logs, disturbance records, and status bits — into IEC 61850 GOOSE messages and MMS reports, which are transmitted upstream to the substation automation system in real time. Simultaneously, DNP3 unsolicited responses can be configured to push critical alarm and measurement data to a remote SCADA master, enabling operators at a control center to monitor substation health without polling delays. This bidirectional, event-driven communication model is what makes the UR8GH indispensable in modern digital substation deployments.
For engineering teams responsible for commissioning and long-term maintenance, the UR8GH significantly reduces diagnostic complexity. Its built-in communication diagnostics allow technicians to verify IEC 61850 logical node mappings, check Modbus register assignments, and monitor DNP3 data object integrity — all from the relay’s front panel or via the GE EnerVista UR Setup software. This eliminates the need for external protocol analyzers during commissioning and accelerates fault isolation during maintenance windows. When integrated with a GE Multilin SR Series relay or a GE D60 Line Distance Relay in a multi-relay substation bay, the UR8GH’s consistent communication architecture ensures that all devices share a unified data model, simplifying SCADA tag mapping and reducing engineering hours.
In smart factory and industrial plant applications beyond power utilities, the UR8GH finds deployment in motor control centers, generator protection panels, and medium-voltage switchgear assemblies where Modbus TCP connectivity to a plant DCS — such as a Honeywell Experion PKS or ABB System 800xA — is required. Its industrial-grade design, rated for operation across a wide temperature range and compliant with IEC 61850-3 electromagnetic compatibility requirements, ensures reliable performance in environments with high electrical noise, vibration, and thermal cycling. The module’s compact form factor and tool-free installation into the UR chassis backplane further reduce installation time and minimize the risk of wiring errors during panel assembly.
Every GE Multilin UR8GH supplied by ZYPLC is sourced from verified supply channels, undergoes pre-shipment functional testing, and is backed by a warranty terms confirmed during quotation covering manufacturing defects and communication interface failures. Global logistics via DHL Express and FedEx International Priority ensure rapid delivery to project sites worldwide, with full export documentation support for customs clearance in regulated markets.
| Parameter | Specification |
|---|---|
| SKU | UR8GH |
| Brand | GE Multilin |
| Series | UR (Universal Relay) Series |
| Product Type | Communication Gateway Module |
| Supported Protocols | IEC 61850 (GOOSE / MMS), Modbus TCP, Modbus RTU, DNP3 (Serial & TCP) |
| Network Interface | Dual 10/100 Mbps Ethernet (RJ-45) |
| Network Topology | Star, Ring (IEC 61850-3 compliant) |
| Serial Interface | RS-485 / RS-232 (Modbus RTU / DNP3 Serial) |
| SCADA/HMI Compatibility | GE iFIX, Wonderware, OSIsoft PI, DNP3 SCADA Masters |
| Chassis Compatibility | GE UR Series Standard Backplane |
| Operating Temperature | -20°C to +60°C |
| EMC Compliance | IEC 61850-3, IEEE 1613 |
| Power Supply | Via UR Chassis Backplane |
| Origin | United States |
| Warranty | warranty terms confirmed during quotation (ZYPLC) |
The UR8GH operates at the center of a layered communication architecture that connects field protection devices to enterprise-level monitoring systems. At the field level, current and voltage signals from instrument transformers are processed by the UR relay’s internal measurement engine, which may include a GE Multilin UR6CT current input module or a UR6VT voltage input module mounted in the same chassis. These analog measurements are digitized and made available to the UR8GH for upstream transmission.
At the control layer, the UR8GH exchanges GOOSE messages with peer relays — such as a GE Multilin T60 Transformer Management Relay or a GE Multilin L90 Line Current Differential Relay — enabling high-speed inter-relay communication for busbar protection and breaker failure schemes without routing through the SCADA system. This peer-to-peer GOOSE architecture, standardized under IEC 61850-8-1, reduces trip signal latency to sub-4ms, a critical requirement for transmission-level protection coordination.
At the network layer, the UR8GH connects to an industrial managed Ethernet switch — such as a Hirschmann MICE3 or a Moxa EDS-510A — which forms the substation LAN. The switch aggregates communication from multiple UR relays and forwards data to the substation automation server running IEC 61850 MMS services. Simultaneously, a DNP3 communication gateway — such as a Moxa MGate or a SEL-3530 RTAC — may bridge DNP3 data to a remote SCADA master over a WAN link, providing control center operators with real-time visibility into substation status.
At the HMI layer, operators interact with substation data through a GE iFIX SCADA workstation or a panel-mounted Weintek cMT HMI, both of which receive live data from the UR8GH via Modbus TCP or OPC DA/UA interfaces. Alarm annunciation, event sequence recording, and disturbance waveform retrieval are all accessible through these interfaces, enabling rapid fault analysis without requiring physical access to the relay panel. At the power layer, the UR chassis is supplied by a GE UR power supply module with redundant input capability, ensuring that communication functions remain active even during AC supply interruptions.
One of the most persistent challenges in industrial substation and plant automation environments is protocol fragmentation — the coexistence of legacy Modbus RTU devices, newer IEC 61850-compliant relays, and DNP3-based SCADA systems that cannot natively communicate with each other. The UR8GH directly addresses this by serving as a multi-protocol translation node within the UR relay platform, eliminating the need for external protocol converters that introduce additional failure points and maintenance overhead.
Data isolation — where field devices generate valuable operational data that never reaches the SCADA or historian system — is another critical problem in aging industrial sites. The UR8GH resolves this by enabling unsolicited DNP3 reporting and IEC 61850 buffered reporting, ensuring that event data, measurement snapshots, and alarm conditions are automatically pushed to the upstream system without requiring polling cycles that can delay critical alarm delivery.
For sites undergoing digital transformation toward IEC 61850-compliant smart substations, the UR8GH provides a migration path that preserves existing Modbus and DNP3 infrastructure while introducing IEC 61850 GOOSE and MMS capabilities. This hybrid communication model allows engineering teams to phase in new SCADA capabilities without a full system replacement, protecting capital investment while progressively improving production line transparency and remote monitoring coverage.
System scalability is addressed through the UR8GH’s support for multiple simultaneous client connections, allowing a single module to serve a SCADA master, a local HMI, and an engineering workstation concurrently. As the substation or plant expands — adding new feeder bays, transformer bays, or motor control centers — additional UR relays with UR8GH modules can be integrated into the existing network without reconfiguring the communication architecture, providing a linear and predictable expansion model that minimizes engineering risk.
Q1: Does the UR8GH support simultaneous IEC 61850, Modbus TCP, and DNP3 communication?
Yes. The UR8GH is designed to support multiple protocol sessions concurrently. IEC 61850 MMS and GOOSE services operate over the Ethernet interface alongside Modbus TCP and DNP3 TCP connections, allowing the module to serve multiple upstream systems — such as a SCADA master, a local HMI, and an engineering workstation — simultaneously without protocol conflicts or performance degradation.
Q2: Is the UR8GH compatible with third-party SCADA systems and HMI platforms?
Yes. The UR8GH’s support for open industrial protocols — IEC 61850, Modbus TCP, and DNP3 — ensures compatibility with a wide range of SCADA and HMI platforms, including GE iFIX, Wonderware InTouch, OSIsoft PI, Ignition by Inductive Automation, and any DNP3-compliant SCADA master. IEC 61850 SCL configuration files (ICD/CID) are available for import into IEC 61850 engineering tools, simplifying system integration and reducing commissioning time.
Q3: What network redundancy options does the UR8GH support?
The UR8GH’s dual Ethernet ports support both star and ring network topologies. In ring configurations compliant with IEC 61850-3, the module participates in rapid spanning tree or PRP/HSR redundancy schemes when connected to compatible managed switches, providing sub-50ms network recovery in the event of a link failure. This ensures that SCADA communication and GOOSE inter-relay messaging remain uninterrupted during network faults.
Q4: What does the warranty terms confirmed during quotation cover, and what pre-shipment testing is performed?
Every UR8GH supplied by ZYPLC is covered by a warranty terms confirmed during quotation against manufacturing defects, communication interface failures, and hardware malfunctions under normal operating conditions. Prior to shipment, each unit undergoes functional testing that verifies Ethernet port connectivity, protocol response, and backplane communication integrity. Detailed test reports are available upon request. For warranty claims or technical support, contact ZYPLC at plc.sales@zyplc.com or +86 19859288691.