GE Grid Solutions
GE UR-8FH Current Transformer for UR Systems
GE Grid Solutions UR-8FH current transformer for UR Series relay systems. Protocol-ready, real-time data, SCADA integration, warranty terms confirmed during quotation. Order at ZYPLC.
GE Grid Solutions
GE Grid Solutions UR-8FH current transformer for UR Series relay systems. Protocol-ready, real-time data, SCADA integration, warranty terms confirmed during quotation. Order at ZYPLC.
Technical Details
Review the original product details, compatibility notes, and sourcing information in a clearer technical document layout.
The GE Grid Solutions UR-8FH is a high-precision current transformer module engineered for the Universal Relay (UR) Series protection and control platform. Designed to serve as a critical signal acquisition node within modern industrial power networks, the UR-8FH captures real-time current waveform data from high-voltage feeders, bus sections, and motor circuits, feeding that information directly into the UR Series relay’s processing core. In smart factory and utility substation environments where millisecond-level response and data fidelity are non-negotiable, the UR-8FH delivers the measurement accuracy and protocol compatibility that engineers depend on.
Unlike generic current sensing components, the UR-8FH is purpose-built for the GE Multilin UR architecture — a modular, rack-based protection platform that integrates seamlessly with SCADA systems, HMI panels, and enterprise-level energy management software. Its standardized signal output ensures that upstream relay modules, including the GE Multilin UR-7SH and UR-7SS protection cards, receive clean, calibrated current inputs without signal conditioning overhead. This tight hardware integration reduces latency in the protection chain and eliminates the data translation errors that commonly arise when mixing third-party sensing components with proprietary relay platforms.
| Parameter | Specification |
|---|---|
| Product SKU | UR 8FH |
| Brand / Series | GE Grid Solutions / Universal Relay (UR) Series |
| Module Type | Current Transformer Input Module |
| Protocol Support | IEC 61850, DNP3, Modbus RTU/TCP, IEC 60870-5-104 |
| Interface Type | Analog CT Input, Rear-panel UR Backplane Connector |
| Transmission Capability | Real-time current measurement, waveform capture, fault data logging |
| Network Compatibility | Ethernet (100 Mbps), RS-485, Fiber Optic (optional) |
| System Application | Substation automation, motor protection, feeder protection, SCADA integration |
| Operating Environment | Industrial, -40°C to +85°C, IEC 61010 compliant |
| Warranty | warranty terms confirmed during quotation — tested before shipment |
In a fully connected industrial power system, the UR-8FH sits at the very beginning of the data acquisition chain. Current signals from primary conductors pass through the transformer windings and are scaled to standardized secondary levels, which are then routed to the GE Multilin UR-8AH analog input module for digitization. Once digitized, the data flows across the UR Series backplane to the main CPU module — typically a GE Multilin UR-9GH or equivalent processing card — where protection algorithms execute in real time.
From the CPU, processed relay data is transmitted over the station LAN using IEC 61850 GOOSE messaging, enabling peer-to-peer communication with adjacent protection relays such as the GE Multilin 750/760 Feeder Protection Relay and the GE Multilin 469 Motor Management Relay. This inter-relay communication eliminates the need for hardwired trip signals between panels, reducing wiring complexity and improving response time in bus differential and breaker failure schemes.
At the SCADA layer, the UR-8FH’s data — now processed and timestamped by the relay CPU — is published via DNP3 over TCP/IP to the plant’s energy management system. Operators monitoring a GE iFIX SCADA or Wonderware System Platform HMI workstation can view real-time current magnitudes, harmonic content, and demand trends without any manual data entry. When a fault occurs, the relay’s oscillography buffer — populated with waveform samples captured by the UR-8FH — is automatically uploaded to the SCADA historian, giving engineers a complete pre-fault and post-fault current record for root cause analysis.
For remote sites or distributed substations, the UR Series relay communicates through an industrial Ethernet switch — such as a Moxa EDS-308 or equivalent managed switch — to a DNP3/IEC 60870-5-104 protocol gateway that bridges the substation LAN to the utility’s wide-area SCADA network. This architecture allows a central control room to monitor dozens of remote feeders, each equipped with UR-8FH-based protection relays, from a single operator console. Edge computing nodes can also subscribe to the relay’s IEC 61850 data model, enabling local analytics and predictive maintenance algorithms to run without cloud dependency.
On the power supply side, the UR Series chassis is typically powered by a GE Multilin UR-9PH DC power supply module, which provides regulated 24 VDC to all installed cards including the UR-8FH. Redundant power inputs ensure that the current transformer module remains operational even during auxiliary power disturbances — a critical requirement in substations where protection must never be compromised.
One of the most persistent challenges in aging industrial power infrastructure is protocol fragmentation. Older protection relays communicate over proprietary serial protocols — Modbus RTU, DNP3 serial, or vendor-specific ASCII formats — while newer systems demand Ethernet-based IEC 61850 or MQTT connectivity. The result is a patchwork of data islands: each relay knows its own current measurements, but that data never reaches the SCADA historian, the energy management system, or the maintenance dashboard in a unified, queryable format.
The GE UR-8FH, as part of the UR Series platform, directly addresses this fragmentation. Because the UR relay CPU supports simultaneous multi-protocol communication — IEC 61850, DNP3, and Modbus TCP running concurrently on the same Ethernet port — a single UR-8FH-equipped relay can serve as both a protection device and a protocol gateway. Legacy Modbus RTU devices on the RS-485 bus can have their data aggregated by the UR relay and re-published over IEC 61850 to the station bus, eliminating the need for a standalone protocol converter.
Remote monitoring is another area where the UR-8FH’s integration depth pays dividends. Because the current transformer module feeds calibrated, timestamped data directly into the relay’s IEC 61850 data model, remote engineers can access live current readings, demand history, and fault records through any IEC 61850-compliant client — including web-based SCADA portals and mobile HMI applications — without requiring a site visit. This capability is particularly valuable for unmanned substations, offshore platforms, and remote mining operations where travel costs are prohibitive.
System expansion is equally straightforward. The UR Series backplane supports hot-swappable modules, meaning additional UR-8FH cards can be installed to expand current input capacity without taking the relay offline. As production lines grow and new motor circuits or feeder bays are added, the protection system scales in parallel — maintaining full data visibility across the expanded network without requiring a new relay installation or SCADA reconfiguration.
Every UR-8FH unit shipped by ZYPLC undergoes a full functional test prior to dispatch, verifying CT ratio accuracy, backplane communication integrity, and protocol response. Units are sourced from verified supply channels and carry a warranty terms confirmed during quotation, with availability subject to RFQ confirmation for shipment arranged after confirmation to minimize project downtime.
Q1: Does the UR-8FH introduce any communication latency that could affect protection response time?
No. The UR-8FH is a hardware current transformer input module — it does not process or route digital data independently. Signal acquisition occurs at the analog level, and digitization is handled by the UR relay CPU at sampling rates up to 64 samples per cycle. Protection trip decisions are made within the relay’s internal processing loop, typically in under 1 cycle (16.7 ms at 60 Hz), independent of any network communication latency.
Q2: Which communication protocols does the UR Series relay support when used with the UR-8FH?
The UR Series relay platform supports IEC 61850 Edition 1 and 2 (GOOSE and MMS), DNP3 (serial and TCP/IP), Modbus RTU and TCP, IEC 60870-5-101/104, and optional fiber optic inter-relay communication. Protocol selection is configured via the relay’s EnerVista UR Setup software and does not require hardware changes to the UR-8FH module.
Q3: Can the UR-8FH be used as a direct replacement for other GE UR Series CT input modules?
The UR-8FH is designed for specific CT input configurations within the UR Series platform. Before substituting it for another UR CT module, verify the CT ratio, burden rating, and slot compatibility using the GE Multilin UR Series Instruction Manual. ZYPLC’s technical team can assist with cross-reference verification to confirm compatibility with your existing relay chassis and firmware version.
Q4: What does the warranty terms confirmed during quotation cover, and how is the pre-shipment test conducted?
Every UR-8FH unit is tested for CT input accuracy, backplane signal integrity, and physical connector condition before shipment. The warranty terms confirmed during quotation covers manufacturing defects and functional failures under normal operating conditions. Units that fail during the warranty period are replaced or repaired at no additional cost. Contact ZYPLC at plc.sales@zyplc.com or +86 19859288691 to initiate a warranty claim or request a test report.