Beckhoff 0024105677D1321: Industrial Data Link for KL/EL Series Smart Factory Networks
The Beckhoff 0024105677D1321 is a high-performance EtherCAT Binary I/O Module engineered for the KL/EL Series terminal bus architecture, delivering deterministic, real-time digital signal acquisition and transmission across modern industrial automation networks. Designed to serve as a critical node in the field-level data chain, this module bridges the gap between physical process signals and the upper-layer control and monitoring systems that drive smart factory operations. Whether deployed in discrete manufacturing, process automation, or hybrid production environments, the 0024105677D1321 provides the reliable binary I/O connectivity that industrial engineers demand for high-speed, low-latency data exchange.
At the heart of its design is the EtherCAT protocol — one of the fastest and most deterministic industrial Ethernet standards available. EtherCAT’s on-the-fly processing architecture allows the 0024105677D1321 to participate in cycle times as low as 100 microseconds, making it ideal for applications where signal latency directly impacts product quality or machine safety. The module integrates seamlessly into Beckhoff’s TwinCAT automation platform, where it is recognized and configured automatically via the EtherCAT network scan, eliminating manual address assignment and reducing commissioning time significantly.
Compatibility & Integration Notes
| Parameter |
Specification |
| SKU / Part Number |
0024105677D1321 |
| Brand |
BECKHOFF |
| Series |
KL / EL Terminal Series |
| Communication Protocol |
EtherCAT (IEC 61158) |
| Module Type |
Binary Digital I/O |
| Interface Type |
EtherCAT Terminal Bus (E-Bus) |
| Transmission Speed |
100 Mbit/s Full Duplex |
| Cycle Time |
≥ 100 µs (EtherCAT distributed clocks) |
| Network Compatibility |
TwinCAT 2/3, EtherCAT Master, IEC 61131-3 PLC |
| System Application |
PLC I/O, SCADA, HMI, Remote I/O, Edge Gateway |
| Origin |
Germany (DE) |
| Warranty |
12 Months |
| Availability |
RFQ Available — shipment arranged after confirmation |
Connected Automation Data Flow
In a fully integrated smart factory architecture, the Beckhoff 0024105677D1321 operates as a field-level signal collector and transmitter, feeding real-time binary status data upward through the automation hierarchy. At the device layer, digital sensors — including proximity switches, photoelectric barriers, and limit switches — connect directly to the module’s input channels. The 0024105677D1321 captures these binary states and transmits them over the EtherCAT E-Bus to the Beckhoff EK1100 EtherCAT Coupler, which serves as the gateway between the terminal strip and the EtherCAT network backbone.
From the coupler, process data flows at deterministic intervals to the Beckhoff CX2040 Embedded PC running TwinCAT 3, where the PLC runtime executes IEC 61131-3 control logic based on the incoming I/O states. Alongside the 0024105677D1321, complementary modules such as the EL2008 8-channel digital output terminal and the EL3068 8-channel analog input terminal extend the I/O capability of the same terminal rail, allowing a single EtherCAT segment to handle both binary and analog process variables simultaneously. For motion-critical applications, the EL7201 servo motor terminal can be integrated on the same bus, enabling coordinated axis control driven by the same real-time data loop.
At the network level, the EtherCAT segment connects to the plant’s industrial Ethernet backbone via managed switches such as the Beckhoff CU2508 port multiplier, which distributes the EtherCAT master signal across multiple independent EtherCAT lines. This topology supports large-scale I/O architectures with hundreds of terminals while maintaining sub-millisecond synchronization across all nodes. SCADA systems — including Wonderware, Ignition, or Siemens WinCC — access live process data through OPC UA or ADS (Automation Device Specification) interfaces exposed by the TwinCAT runtime, enabling real-time dashboards, trend logging, and alarm management without additional protocol converters.
For remote monitoring and diagnostics, the Beckhoff IPC or CX series controller can publish data to cloud-based MES or IoT platforms via MQTT or REST APIs, with the 0024105677D1321’s I/O states forming part of the digital twin dataset. HMI panels such as the Beckhoff CP2916 multi-touch panel display live field status, operator prompts, and alarm acknowledgment screens driven directly by the TwinCAT variable table — all sourced from the binary signals captured by this module. In distributed plant layouts, remote I/O segments using EtherCAT over fiber or EtherCAT P (combined power and communication) extend the network reach without signal degradation, keeping the 0024105677D1321 and its companion terminals fully synchronized with the central control system.
Solving Data Isolation in Industrial Sites
One of the most persistent challenges in industrial automation is the fragmentation of field data across incompatible protocols and isolated control islands. Legacy systems running Profibus, Modbus RTU, or DeviceNet often cannot communicate directly with modern EtherCAT-based controllers, creating data silos that prevent plant-wide visibility and coordinated control. The Beckhoff 0024105677D1321, deployed within a TwinCAT-managed EtherCAT network, addresses this challenge by providing a standardized, high-speed digital I/O interface that integrates natively with Beckhoff’s protocol gateway modules — such as the EL6731 Profibus master terminal or the EL6601 EtherNet/IP slave terminal — allowing legacy field devices to be absorbed into the EtherCAT data fabric without replacing existing wiring or instrumentation.
Production line transparency is achieved through the module’s deterministic data delivery: every binary input state is timestamped with EtherCAT distributed clock precision, enabling accurate event sequencing and root-cause analysis in SCADA historian databases. When a machine fault occurs, the exact moment of the triggering digital signal is captured and correlated with upstream and downstream process variables, dramatically reducing mean time to repair (MTTR). Remote diagnostics are supported through TwinCAT’s built-in ADS router, which allows engineering teams to monitor I/O states, force outputs for testing, and review diagnostic counters from any networked workstation — without physical access to the control cabinet.
System expansion is equally straightforward: additional EL-series terminals can be snapped onto the same DIN rail and are automatically detected by the EtherCAT master during the next network scan. This plug-and-play scalability means that production capacity increases, new sensor integrations, or safety I/O additions can be implemented without modifying the existing network configuration or taking the line offline for extended periods. Every unit of the 0024105677D1321 supplied by ZYPLC undergoes pre-shipment functional testing to verify channel integrity, communication handshake, and E-Bus signal quality — ensuring that the module performs to specification from the moment it is installed.
Industrial Connectivity FAQ
Q1: What is the communication latency of the Beckhoff 0024105677D1321 in an EtherCAT network?
The 0024105677D1321 operates within the EtherCAT protocol’s standard cycle time framework, supporting distributed clock synchronization with jitter below 1 microsecond. In typical TwinCAT 3 deployments, I/O cycle times of 250 µs to 1 ms are standard, with sub-100 µs cycles achievable in optimized configurations. This deterministic latency makes the module suitable for high-speed machine control, safety interlock monitoring, and synchronized multi-axis applications.
Q2: Is the 0024105677D1321 compatible with non-Beckhoff EtherCAT masters?
Yes. As an EtherCAT-compliant device conforming to IEC 61158, the 0024105677D1321 can operate with any certified EtherCAT master, including those from Omron, Yaskawa, Kollmorgen, and open-source EtherCAT master stacks (e.g., SOEM). An ESI (EtherCAT Slave Information) file is available for import into third-party engineering tools, enabling full configuration and diagnostics outside of the TwinCAT environment.
Q3: How does ZYPLC ensure network stability and product quality before shipment?
Every Beckhoff 0024105677D1321 unit dispatched by ZYPLC undergoes a pre-shipment inspection that includes E-Bus communication verification, channel-by-channel I/O functional test, and visual inspection for connector and housing integrity. Units are shipped in anti-static packaging with original manufacturer labeling. All products carry a warranty terms confirmed during quotation covering manufacturing defects and communication failures under normal operating conditions.
Q4: Can this module be integrated into an existing SCADA or MES system without replacing the current PLC platform?
Yes. The 0024105677D1321 integrates into existing automation architectures through Beckhoff’s TwinCAT ADS interface or OPC UA server, which act as protocol bridges between the EtherCAT I/O layer and higher-level SCADA, MES, or cloud platforms. This allows plants running Siemens, Rockwell, or Schneider PLCs to incorporate Beckhoff EtherCAT I/O segments as remote I/O subsystems, connected via standard industrial Ethernet without disrupting the existing control hierarchy.